Jewelry Glaze

how to make jewelry by yourself

Do you have questions about how to make fashion jewelry with CAD/CAM, Hand-Fabrication, or Casting?  The Guide to Jewelry Making is all about the fashionable Korean Jewelry Manufacturing techniques and technologies.  Learn how to make Custom Jewelry Manufacturing easier and more profitable.
 
Learn Jewelry Making Techniques others use to Succeed
All the articles and videos are provided by working jewelers who face the same problems you do day in and day out.  Our experts help beginners learn the basics they need and show more experienced jewelers how to polish their skills and learn new techniques.  Here are the article about how to make button jewelry by my friend,
One great homemade gift idea comes right from grandma’s button box. Learning how to make button jewelry is so easy, and the finished button rings, bracelets and charms make such lovely, sentimental gifts.
Button jewelry supplies
To make button jewelry, you will need to gather a few simple supplies. The supplies I use are:
 Pretty buttons in a variety of colors and shapes Jewelry glue, such as Diamond Glaze
 Jewelry wire, Jump rings ,Ring blanks and other findings
Make a button ring
Button rings are so colorful and pretty. I like to create a layer of three to four buttons for my rings. To make the simplest type of button ring, you will need to start with a ring blank. Simply glue the biggest button onto the ring blank with the least interesting side facing down. Then center a second smaller button on top of the bottom button and glue it into place. Add additional buttons to the stack until you are satisfied with the result.
You may want to finish the stack off with a rhinestone so that the button holes in the top button are covered. I try to find a shank button, which is the type of the button that has a little loop on the bottom instead of two or four holes in the surface, to finish my stack with. I usually have to snip off the shank to make the shank button adhere securely to the one below it.
If you don’t have a ring blank, you can still make a button ring. Cut a piece of wire and thread it through a button so that the two loose ends come through the bottom of the button. Then, use the two ends to make a wrapped loop that is the right size for your finger. From here, you are ready to make the ring just as you would if you were using the ring blank.
Button charms
Button charms are very similar to rings. The only real difference is that you will be threading a jump ring through the bottom button instead of gluing the button to a ring blank. It can be a bit challenging to get the jump ring through the button holes. You may have to use pliers to adjust the jump ring’s shape a bit to get it to work. After you get the jump ring through, you can glue the smaller button layers onto the bigger button.

About the Author

you may have interested in Fashion Jewelry, Korean Jewelryand where to  wholesale jewelry in a cheap price.

Environmental Technology 16-Ounce Kit Lite Pour-On, High Gloss Finish $11.90 EnviroTex Lite Pour-On High Gloss Finish. This thick, high gloss finish will protect and beautify any surface! Use it over wood, rock, ceramic and much more. It is perfect for putting a smooth finish over natural surfaces without hiding any of the details that make it beautiful. This package contains 16oz/473ml: enough to cover approximately 4 Square feet. Contents conform to ASTM D4236. Made in U…

Homax 5250 Household Lead Test Kit $9.99 Homax Corp. 5250 – 2Pk Lead Testing Kit, Lead check test swabs detect lead on any surface within 1 minute. To use the test swab just squeeze the test swab firmly at the 2 points indicated, shake and then continue to squeeze until yellow liquid appears on…

Rust-Oleum Varathane 200061H 1/2-Pint Interior Crystal Clear Water-Based Polyurethane, Gloss Finish $7.54 Rust-Oleum 200061 Diamond Polyurethane GlossRust-Oleum 200061 Diamond Polyurethane Gloss Features:; Transparent, non-yellowing ; Twice the durability of polyurethane ; Safe and easy to apply ; Tough protection for wood, paints and wallpaper ; Water clean up ; Gloss finish ; 1/2 pint…

Jelmar TX-6 Tarn-X Tarnish Remover $3.60 Removes tarnish quickly and easily – just wipe and rinse. No rubbing and scrubbing. Lets you enjoy the beauty of your precious metals all year. Safe to use on your finest metals. Specifically formulated for: sterling silver, silver plate, platinum, copper, gold, and diamonds. 12 fl. oz. black bottle….

Jelmar TX-6 Tarn-X Tarnish Remover $34.79 Removes tarnish quickly and easily just wipe and rinse. No rubbing and scrubbing. Lets you enjoy the beauty of your precious metals all year. Safe to use on your finest metals. Specifically formulated for: sterling silver, silver plate, platinum, copper…

Crayola Model Magic Jewelry Studio $18.99 Crayola Model Magic Jewelry Studio lets you fashion fun and fabulous handmade trinkets, bracelets, necklaces and much more. The bead spinner mashes small amounts of Model Magic into marbled beads and baubles. Make handmade gifts for friends and family, host a jewelry-making party or create your own line of colorful accessories.Product Dimensions (inches): 2 (L) x 13.5 (W) x 12.1 (H)Age: 6 years an…

Artterro Collage Jewelry $24.29 The Collage Jewelry Kit from Artterro allows you to design & make your own wearable art! Simply cut & glue fancy tissue papers onto the wooden bangle, beads and pendants. Finish by adorning with glass beads & glaze to make a unique piece of jewelry. Kit provides enough material to design 6 different jewelry pieces. This eco art kit provides hours of fun with friends & family. Great for ages 7 and …

Paper Beads Book Kit- $21.00 KLUTZ- Paper Beads Book Kit. Turn simple strips of paper into beautiful beaded jewelry. This kit includes everything you need to make 200 beads: bead winding tool; strips of paper (triangle and rectangle); drying pedestal; toothpicks; glass beads; stretchy elastic cord; glaze; a ruler and detailed instructions and ideas. Recommended for ages 8 and up. WARNING: CHOKING HAZARD: Small parts. Not for …

Capsters: Make Bottle Caps into Great Works of Coolness (Klutz) $10.40 Summary:Everything you need to transform boring bottle caps into awesome art is included with this book. Take a bottle cap, add the included punch-out art, a charm, craft gems or glitter, use the special glue to make your creation permanent and you’ve just made a Capster! Finished projects make terrific backpack danglers or fridge magnets. Whatever you choose, this craft really makes your ar…

Paper Beads: Turn Simple Strips of Paper into Beautiful Beaded Jewelry (Klutz) $10.73 No one will guess these posh beads are made of paper. Paper Beads comes with 200 precut strips of beautifully designed paper in 22 colors and patterns and a custom tool for winding them into beads. Super-clear how-to’s make it easy to create straight beads, round beads, simple beads, and fancy beads. A bottle of durable glaze gives each bead a polished finish, and inside the book, we show how to b…

22K Gold Plated Lead-Free Pewter Beaded Round Picture Frame Pendant 23.5mm (1) $4.89 Beautiful, Quality Tierracast 22K Gold Plated Pewter Pendant. Beaded Round With Spiral Design On Back. Create Personalized Pendants With Your Own Photos. 23.5mm x 19.5mm. 1 Pendant This lead-free pewter charm is plated with fine 22K Gold in an antiqued finish. Round Shape With Beaded Design. Back of pendant features leafy branch design. (See photo for details.) Personalize pendant with your own photos, letters, graphics, bits of fabric, small beads, etc. The sky’s the limit! We recommend using Diamond Glaze or DG3 for a clear, glass-like finish. Basic instructions provided below. Measurements: Pendant is 23.5mm including loop. 19.5mm wide. 3.3mm thick. Area for photo is approximately 12.6mm in diameter. Hanging loop is 2.2mm. Quantity: 1 Pendant. TierraCast Pewter is made in the USA, using Lead Free Pewter that exceeds both the CPSC standard and the new California law regulating children’s jewelry content. Tips for Picture Perfect TierraCast Frames using Dimensional Art Glazes. Choosing images for your frames: If applying a glaze, use images printed with non water-soluble inks. Images printed with regular ink-jet ink will bleed. Place cropped images in frame with small amount of adhesive and allow to dry. Glaze and adhesive recommendations: Use Diamond Glaze dimensional adhesive or DG3. You can use a little glaze as the initial adhesive to adhere image to frame. Avoiding Bubbles: Before applying glazes/adhesives, squeeze a bit through the tip to release air bubbles from the nozzle. Don?t shake the bottle. Should bubbles occur, use a small dry paint brush to carefully pop them. Once the glaze starts to set, bubbles are harder to remove. Be patient: Let the glaze dry thoroughly before handling your picture frames. You won?t be sorry. Our Jewel Setter is a great tool to use with this kind of project. You can avoid touching the adhesive and the other end of the tool can be used to pop any stray bubbles. Have fun. Play with lots of different materials in the frames. Phot

22K Gold Plated Lead-Free Pewter Flower Picture Frame Pendant 23mm (1) $4.89 Beautiful, Quality Tierracast 22K Gold Plated Pewter Pendant. Flower Shape With Groovy Circle Design On Back. Create Personalized Pendants With Your Own Photos. 27mm x 17.4mm . 1 Pendant This lead-free pewter charm is plated with fine 22K Gold in an antiqued finish. Sweet Flower Shape. Back of pendant features Abstract circle design. (See photo for details.) Personalize pendant with your own photos, letters, graphics, bits of fabric, small beads, etc. The sky is the limit! We recommend using Diamond Glaze or DG3 for a clear, glass-like finish. Basic instructions provided below. Measurements: Pendant is 27mm including loop. 17.4mm wide. 3.4mm thick. Area for photo is approximately 7.4mm in diameter. Hanging loop is 2.2mm. Quantity: 1 Pendant. TierraCast Pewter is made in the USA, using Lead Free Pewter that exceeds both the CPSC standard and the new California law regulating children’s jewelry content. Tips for Picture Perfect TierraCast Frames using Dimensional Art Glazes. Choosing images for your frames. If applying a glaze, use images printed with non water-soluble inks. Images printed with regular ink-jet ink will bleed. Place cropped images in frame with small amount of adhesive and allow to dry. Glaze and adhesive recommendations: Use Diamond Glaze dimensional adhesive or DG3. You can use a little glaze as the initial adhesive to adhere image to frame. Avoiding Bubbles: Before applying glazes/adhesives, squeeze a bit through the tip to release air bubbles from the nozzle. Don?t shake the bottle. Should bubbles occur, use a small dry paint brush to carefully pop them. Once the glaze starts to set, bubbles are harder to remove. Be patient: Let the glaze dry thoroughly before handling your picture frames. You won?t be sorry. Our Jewel Setter is a great tool to use with this kind of project. You can avoid touching the adhesive and the other end of the tool can be used to pop any stray bubbles. Have fun. Play with lots of different materials in the frames. Photos, p

22K Gold Plated Lead-Free Pewter Flower Shape Picture Frame Pendant 17.5mm (1) $4.49 Beautiful, Quality Tierracast 22K Gold Plated Pewter Pendant. Sweet Flower Shape With Spiral Design On Back. Create Personalized Pendants With Your Own Photos . 17.5mm x 13mm . 1 Pendant This lead-free pewter charm is plated with fine 22K Gold with some antiquing to bring out design. Adorable flower shape. Back of pendant has a circle and dot design. (See photo for details.) Personalize pendant with your own photos, letters, graphics, bits of fabric, small beads, etc. The sky’s the limit! We recommend using Diamond Glaze or DG3 for a clear, glass-like finish. Basic instructions provided below. Measurements: Pendant is 17.5mm including loop. 13mm wide. 3.2mm thick. Area for photo is approximately 9mm in diameter. Hanging loop is 2.3mm. Quantity: 1 Pendant. TierraCast Pewter is made in the USA, using Lead Free Pewter that exceeds both the CPSC standard and the new California law regulating children’s jewelry content. . Tips for Picture Perfect TierraCast Frames using Dimensional Art Glazes. Choosing images for your frames: If applying a glaze, use images printed with non water-soluble inks. Images printed with regular ink-jet ink will bleed. Place cropped images in frame with small amount of adhesive and allow to dry. Glaze and adhesive recommendations: Use Diamond Glaze dimensional adhesive or DG3. You can use a little glaze as the initial adhesive to adhere image to frame. Avoiding Bubbles: Before applying glazes/adhesives, squeeze a bit through the tip to release air bubbles from the nozzle. Don?t shake the bottle. Should bubbles occur, use a small dry paint brush to carefully pop them. Once the glaze starts to set, bubbles are harder to remove. Be patient: Let the glaze dry thoroughly before handling your picture frames. You won?t be sorry. Our Jewel Setter is a great tool to use with this kind of project. You can avoid touching the adhesive and the other end of the tool can be used to pop any stray bubbles. Have fun: Play with lots of different materials in the f

22K Gold Plated Lead-Free Pewter Hammered Square Picture Frame Pendant 22mm (1) $4.89 Beautiful, Quality Tierracast 22K Gold Plated Pewter Pendant. Hammered Square With Spiral Design On Back. Create Personalized Pendants With Your Own Photos. 22mm x 18.5mm. 1 Pendant This lead-free pewter charm is plated with fine 22K Gold in an antiqued finish. Square Shape With Hammered Texture. Back of pendant features spiral design. (See photo for details.) Personalize pendant with your own photos, letters, graphics, bits of fabric, small beads, etc. The sky is the limit! We recommend using Diamond Glaze or DG3 for a clear, glass-like finish. Basic instructions provided below. Measurements: Pendant is 22mm including loop. 18.5mm wide. 2.8mm thick. Area for photo is approximately 12.1mm square. Hanging loop is 2.2mm. Quantity: 1 Pendant. TierraCast Pewter is made in the USA, using Lead Free Pewter that exceeds both the CPSC standard and the new California law regulating children’s jewelry content. Tips for Picture Perfect TierraCast Frames using Dimensional Art Glazes. Choosing images for your frames: If applying a glaze, use images printed with non water-soluble inks. Images printed with regular ink-jet ink will bleed. Place cropped. images in frame with small amount of adhesive and allow to dry. Glaze and adhesive recommendations: Use Diamond Glaze dimensional adhesive or DG3. You can use a little glaze as the initial adhesive to adhere image to frame. Avoiding Bubbles: Before applying glazes/adhesives, squeeze a bit through the tip to release air bubbles from the nozzle. Don?t shake the bottle. Should bubbles occur, use a small dry paint brush to carefully pop them. Once the glaze starts to set, bubbles are harder to remove. Be patient: Let the glaze dry thoroughly before handling your picture frames. You won?t be sorry. Our Jewel Setter is a great tool to use with this kind of project. You can avoid touching the adhesive and the other end of the tool can be used to pop any stray bubbles. Have fun. Play with lots of different materials in the frames. Photos, pl

22K Gold Plated Lead-Free Pewter Oval Scalloped Picture Frame Pendant (1) $5.19 Beautiful, Quality Tierracast 22K Gold Plated Pewter Pendant. Large Oval Shape With Leaf Design On Back. Create Personalized Pendants With Your Own Photos. 28.5mm x 19mm. 1 Pendant This lead-free pewter charm is plated with fine 22K Gold in an antiqued finish. Large Oval Shape with scalloped edges. Back of pendant features leafy branch design. (See photo for details.) Personalize pendant with your own photos, letters, graphics, bits of fabric, small beads, etc. The sky is the limit! We recommend using Diamond Glaze or DG3 for a clear, glass-like finish. Basic instructions provided below. Measurements: Pendant is 28.5mm including loop. 19mm wide. 2.5mm thick. Area for photo is approximately 17mm X 11.5mm. Hanging loop is 2.3mm. Quantity: 1 Pendant. TierraCast Pewter is made in the USA, using Lead Free Pewter that exceeds both the CPSC standard and the new California law regulating children’s jewelry content. Tips for Picture Perfect TierraCast Frames using Dimensional Art Glazes. Choosing images for your frames: If applying a glaze, use images printed with non water-soluble inks. Images printed with regular ink-jet ink will bleed. Place cropped. images in frame with small amount of adhesive and allow to dry. Glaze and adhesive recommendations: Use Diamond Glaze dimensional adhesive or DG3. You can use a little glaze as the initial adhesive to adhere image to frame. Avoiding Bubbles. Before applying glazes/adhesives, squeeze a bit through the tip to release air bubbles from the nozzle. Don?t shake the bottle. Should bubbles occur, use a small dry paint brush to carefully pop them. Once the glaze starts to set, bubbles are harder to remove. Be patient: Let the glaze dry thoroughly before handling your picture frames. You won?t be sorry. Our Jewel Setter is a great tool to use with this kind of project. You can avoid touching the adhesive and the other end of the tool can be used to pop any stray bubbles. Have fun. Play with lots of different materials in the frames. Ph

22K Gold Plated Lead-Free Pewter Rectangle Picture Frame Pendant 35mm (1) $5.39 Beautiful, Quality Tierracast 22K Gold Plated Pewter Pendant . Textured Rectangle With Geometric Pattern On Back . Create Personalized Pendants With Your Own Photos . 34.7mm x 19mm . 1 Pendant This lead-free pewter charm is plated with fine 22K Gold in a Bright finish. Long Rectangle Shape With Textured Edges. Back of pendant features geometric design. (See photo for details.) Personalize pendant with your own photos, letters, graphics, bits of fabric, small beads, etc. The sky’s limit! We recommend using Diamond Glaze or DG3 for a clear, glass-like finish. Basic instructions provided below. Measurements: Pendant is 34.7mm including loop. 19mm wide. 3mm thick. Area for photo is approximately 25mm X 12.7mm. Hanging loop is 2mm. Quantity: 1 Pendant. TierraCast Pewter is made in the USA, using Lead Free Pewter that exceeds both the CPSC standard and the new California law regulating children’s jewelry content. . Tips for Picture Perfect TierraCast Frames using Dimensional Art Glazes. Choosing images for your frames: . If applying a glaze, use images printed with non water-soluble inks. . images printed with regular ink-jet ink will bleed. Place cropped . images in frame with small amount of adhesive and allow to dry. . Glaze and adhesive recommendations: . Use Diamond Glaze dimensional adhesive or DG3. You can use a little glaze as the initial adhesive to adhere image to frame.. Avoiding Bubbles: . Before applying glazes/adhesives, squeeze a bit through the tip to release air bubbles from the nozzle. Don?t shake the bottle. Should . bubbles occur, use a small dry paint brush to carefully pop them. Once the glaze starts to set, bubbles are harder to remove. . Be patient: Let the glaze dry thoroughly before handling your picture frames. You won?t be sorry. . Our Jewel Setter is a great tool to use with this kind of project. You can avoid touching the adhesive and the other end of the tool can be used to pop any stray bubbles.. Have fun: . Play with lots of different mate

22K Gold Plated Lead-Free Pewter Square Picture Frame Pendant 21mm (1) $4.89 Beautiful, Quality Tierracast 22K Gold Plated Pewter Pendant. Rustic Square With Spiral Design On Back. Create Personalized Pendants With Your Own Photos. 22mm x 18.5mm. 1 Pendant This lead-free pewter charm is plated with fine 22K Gold in an antiqued finish. Square Shape With Rustic Edges. Back of pendant features spiral design. (See photo for details.) Personalize pendant with your own photos, letters, graphics, bits of fabric, small beads, etc. The sky’s limit! We recommend using Diamond Glaze or DG3 for a clear, glass-like finish. Basic instructions provided below. Measurements: Pendant is 21mm including loop. 18mm wide. 2.6mm thick. Area for photo is approximately 12.1mm X 12.7mm. Hanging loop is 2.2mm. Quantity: 1 Pendant. TierraCast Pewter is made in the USA, using Lead Free Pewter that exceeds both the CPSC standard and the new California law regulating children’s jewelry content. Tips for Picture Perfect TierraCast Frames using Dimensional Art Glazes. Choosing images for your frames: If applying a glaze, use images printed with non water-soluble inks. Images printed with regular ink-jet ink will bleed. Place cropped images in frame with small amount of adhesive and allow to dry. Glaze and adhesive recommendations: Use Diamond Glaze dimensional adhesive or DG3. You can use a little glaze as the initial adhesive to adhere image to frame. Avoiding Bubbles: Before applying glazes/adhesives, squeeze a bit through the tip to release air bubbles from the nozzle. Don?t shake the bottle. Should bubbles occur, use a small dry paint brush to carefully pop them. Once the glaze starts to set, bubbles are harder to remove. Be patient: Let the glaze dry thoroughly before handling your picture frames. You won?t be sorry. Our Jewel Setter is a great tool to use with this kind of project. You can avoid touching the adhesive and the other end of the tool can be used to pop any stray bubbles. Have fun. Play with lots of different materials in the frames. Photos, playing cards,

ANT GOLD PLATED COLLAGE FRAMED PENDANT ROUND 1 1/4 INCH $8.61 Patera Brand Collage Large Pendant Bead. Antiqued Gold Plated Over Pewter. Lead-free. Large Framed Circle.1 1/4 Inch. Large circle bezel base for collage, Steampunk, cabochon, and resin dome projects. Antiqued Gold plated onto lead-free pewter. One loop at top. Completely customize jewelry by using a Patera base and embellishing with your own photos, words, and designs. Layer images and small stones, charms, and glitter by using Diamond Glaze or Magic-Glos UV resin. UV Resin can cure quickly in sunlight, or use a table-top UV lamp. This large pendant is a bezel setting, with raised, rounded frame. It will allow for doming resin, giving a 3-D look to layered objects. Back is smooth and flat. Measurements: Total length is 40mm long. Round outer area is 37mm in diameter. Inner work area measures 36.7mm (1 1/4 Inch.) Approximately 1.5mm deep. Hanging loop has an interior diameter of 1.5mm. Quantity: 1 large pendant.

ANT. COPPER PLATED COLLAGE PENDANT GRANDE OVAL 1.5 INCH $8.34 Patera Brand Collage Pendant Bead. Antiqued Copper Plated Over Pewter. Lead-free. Oval.1 1/2 Inch X 1 Inch / 38 X 25.4mm. Extra Large oval base for collage, Steampunk, cabochon, and resin dome projects. Antiqued copper plated onto lead-free pewter. Completely customize jewelry by using a Patera base and embellishing with your own photos, words, and designs. Layer images and small stones, charms, and glitter by using Diamond Glaze or Magic-Glos UV resin. UV Resin can cure quickly in sunlight, or use a table-top UV lamp. This pendant is a bezel setting, with a plain edge. It will allow for doming resin, giving a 3-D look to layered objects. Back is smooth and flat. Measurements: Total length is 44.5mm long. Inner work area measures 1 1/2 Inch X 1 Inch (38 X 25.4mm) Approximately 3mm deep. Hanging loop has an interior diameter of 2mm. Quantity: 1 pendant bead.

ANT. COPPER PLATED PATERA LRG BEZEL CIRCLE PENDANT 19MM $5.74 Patera Brand Collage Pendant. Antiqued Copper Plated Over Pewter. Lead-free. Small 19mm Diameter Circle. Use 5/8 Inch Punch. Small circle bezel base for collage, Steampunk, cabochon, and resin dome projects. Antiqued Copper plated onto lead-free pewter. Pendant features a closed perpendicular loop at top. Completely customize jewelry by using a Patera base and embellishing with your own photos, words, and designs. Layer images and small stones, charms, and glitter by using Diamond Glaze or Magic-Glos UV resin. UV Resin can cure quickly in sunlight, or use a table-top UV lamp. If using a clear glass cabochon, we recommend using resin as an adhesive. If the back of your cab is opaque, use E-6000 for the ultimate hold. This pendant is a bezel setting, with raised edge. It will allow for doming resin, giving a 3-D look to layered objects. Back is smooth and flat. Measurements: Circle has a 19mm outer diameter and a 17mm inner diameter. Approximately 3mm deep. Hanging loop has an interior diameter of 3.7mm, so it will fit a chain or cord up to 3.5mm thick. Quantity: 1 Pendant.

ANT. SILVER PLATED COLLAGE PENDANT ROUND 2-LOOP 5/8 IN. $5.74 Patera Brand Collage 2-Loop Pendant Bead. Antiqued Silver Plated Over Pewter. Lead-free. 27mm. Medium circle base for collage, Steampunk, cabochon, and resin dome projects. Antiqued silver plated onto lead-free pewter. Connector style features a closed loop at opposite ends. Completely customize jewelry by using a Patera base and embellishing with your own photos, words, and designs. Layer images and small stones, charms, and glitter by using Diamond Glaze or Magic-Glos UV resin. UV Resin can cure quickly in sunlight, or use a table-top UV lamp. Link with jump rings up to 18 Gauge thickness. This connector is a bezel setting, with a flush edge. It will allow for doming resin, giving a 3-D look to layered objects. Back is smooth and flat. Measurements: Total length is 28.5mm long. Round outer area is 19mm in diameter. Inner work area measures 16.7mm (5/8 Inch.) Approximately 1.5mm deep. Hanging loops have an interior diameter of 1.5mm. Quantity: 1 Small pendant.

ANT. SILVER PLATED PATERA LRG BEZEL CIRCLE PENDANT 19MM $5.74 Patera Brand Collage Pendant. Antiqued Silver Plated Over Pewter. Lead-free. Small 19mm Diameter Circle. Use 5/8 Inch Punch. Small circle bezel base for collage, Steampunk, cabochon, and resin dome projects. Antiqued silver plated onto lead-free pewter. Pendant features a closed perpendicular loop at top. Completely customize jewelry by using a Patera base and embellishing with your own photos, words, and designs. Layer images and small stones, charms, and glitter by using Diamond Glaze or Magic-Glos UV resin. UV Resin can cure quickly in sunlight, or use a table-top UV lamp. If using a clear glass cabochon, we recommend using resin as an adhesive. If the back of your cab is opaque, use E-6000 for the ultimate hold. This pendant is a bezel setting, with raised edge. It will allow for doming resin, giving a 3-D look to layered objects. Back is smooth and flat. Measurements: Circle has a 19mm outer diameter and a 17mm inner diameter. Approximately 3mm deep. Hanging loop has an interior diameter of 3.7mm, so it will fit a chain or cord up to 3.5mm thick. Quantity: 1 Pendant.

ANTIQUED GOLD PLATED COLLAGE PENDANT CIRCLE 1/2 INCH $3.16 Patera Brand Collage Pendant Bead. Antiqued Gold Plated Over Pewter. Lead-free. Mini Circle.1/2 Inch / 13mm. Mini Circle base for collage, Steampunk, cabochon, and resin dome projects. Antiqued gold plated onto lead-free pewter. Completely customize jewelry by using a Patera base and embellishing with your own photos, words, and designs. Layer images and small stones, charms, and glitter by using Diamond Glaze, Gel du Soleil epoxy, or Magic-Glos UV resin. UV Resin can cure quickly in sunlight, or use a table-top UV lamp. This pendant is a bezel setting, with a plain edge. It will allow for doming resin, giving a 3-D look to layered objects. Back is smooth and flat. Measurements: Total length is 18mm long. Pendant is 15mm in diameter. Inner work area measures 13mm (1/2 Inch) diameter. Approximately 1.5mm deep. Hanging loop has an interior diameter of 1.8mm. Quantity: 1 pendant bead. Please note: Photos may not be to scale, please rely on listed measurements to choose your size.

ANTIQUED GOLD PLATED PATERA COLLAGE PENDANT SQUARE 18MM $5.74 Patera Brand Collage Pendant Bead. Antiqued Gold Plated Over Pewter. Lead-free. Square.18mm Wide. Small Square base for collage, Steampunk, cabochon, and resin dome projects. Antiqued Gold plated onto lead-free pewter. Completely customize jewelry by using a Patera base and embellishing with your own photos, words, and designs. Layer images and small stones, charms, and glitter by using Diamond Glaze or Magic-Glos UV resin. UV Resin can cure quickly in sunlight, or use a table-top UV lamp. Amazing Glaze or Fluxe powder can be baked into these frames. Link with jump rings up to 18 Gauge thickness. This small pendant has right-angle edges. It will allow for doming resin, giving a 3-D look to layered objects. Back is smooth and flat. Measurements: Total length is 26mm long. Outer area is 18mm square. Inner work area measures 16mm (5/8 Inch.) Approximately 3mm deep. Hanging loop have an interior diameter of 3.6mm. Quantity: 1 pendant.

ANTIQUED SILVER PLATED COLLAGE PENDANT RECTANGLE 1 1/4 $7.19 Patera Brand Collage Pendant Bead. Antiqued Silver Plated Over Pewter. Lead-free. Long Rectangle.1 1/4 Inch / 31mm. Large rectangle base for collage, Steampunk, cabochon, and resin dome projects. Antiqued silver plated onto lead-free pewter. Completely customize jewelry by using a Patera base and embellishing with your own photos, words, and designs. Layer images and small stones, charms, and glitter by using Diamond Glaze, Gel du Soleil epoxy, or Magic-Glos UV resin. UV Resin can cure quickly in sunlight, or use a table-top UV lamp. This pendant is a bezel setting, with a plain edge. It will allow for doming resin, giving a 3-D look to layered objects. Back is smooth and flat. Measurements: Total length is 42mm long. Pendant space is 34mm X 22mm. Inner work area measures 31mm X 19.5mm (1 1/4 Inch X 3/4 Inch.) Approximately 3mm deep. Hanging loop has an interior diameter of 3.5mm. Quantity: 1 pendant bead. Please note: Photos may not be to scale, please rely on listed measurements to choose your size.

ANTIQUED SILVER PLATED COLLAGE PENDANT SQUARE 15/16 IN. $7.19 Patera Brand Collage Pendant Bead. Antiqued Silver Plated Over Pewter. Lead-free. Large Square.15/16 Inch / 24mm. Large Square base for collage, Steampunk, cabochon, and resin dome projects. Antiqued silver plated onto lead-free pewter. Completely customize jewelry by using a Patera base and embellishing with your own photos, words, and designs. Layer images and small stones, charms, and glitter by using Diamond Glaze, Gel du Soleil epoxy, or Magic-Glos UV resin. UV Resin can cure quickly in sunlight, or use a table-top UV lamp. This pendant is a bezel setting, with a plain edge. It will allow for doming resin, giving a 3-D look to layered objects. Back is smooth and flat. Measurements: Total length is 33.5mm long. Pendant is 26.5mm Square. Inner work area measures 24mm (15/16 Inch Square.) Approximately 3mm deep. Hanging loop has an interior diameter of 4mm. Quantity: 1 pendant bead. Please note: Photos may not be to scale, please rely on listed measurements to choose your size.

ANTIQUED SILVER PLATED PATERA LARGE BEZEL ROUND RING $7.19 Patera Brand Collage Ring. Antiqued Silver Plated Over Pewter. Lead-free. Large 20mm Diameter Circle. Adjustable Ring Size. Large circle bezel base for collage, Steampunk, cabochon, and resin dome projects. Antiqued silver plated onto lead-free pewter. This ring is adjustable, and will fit most adult ring sizes. Completely customize jewelry by using a Patera base and embellishing with your own photos, words, and designs. Layer images and small stones, charms, and glitter by using Diamond Glaze or Magic-Glos UV resin. UV Resin can cure quickly in sunlight, or use a table-top UV lamp. If using a clear glass cabochon, we recommend using Diamond Glaze as an adhesive. If the back of your cab is opaque, use E-6000 for the ultimate hold. This ring is a bezel setting, with slightly raised edge. Will allow for doming resin, giving a 3-D look to layered objects. Measurements: Circle has a 20mm outer diameter and a 17.7mm inner diameter. Approximately 2mm deep. Band of ring is 9.5mm wide and is adjustable to fit most adult sizes. Quantity: 1 Ring.

ANTQ GOLD PLATED PATERA LG OVAL BEZEL EARRINGS 1 PAIR $8.91 Patera Brand Earring Findings. Antiqued 22K Gold Plated Over Lead-free Pewter. Large Oval Bezels. Quantity: 1 Pair. Hook earrings with large oval bezel base for collage, Steampunk, cabochon, and resin dome projects. Antiqued 22K Gold plated onto lead-free pewter. Completely customize jewelry by using a Patera base and embellishing with your own photos, words, and designs. Layer images and small stones, charms, and glitter by using Diamond Glaze or Magic-Glos UV resin. UV Resin can cure quickly in sunlight, or use a table-top UV lamp. If using a clear glass cabochon, we recommend using Diamond Glaze as an adhesive. If the back of your cab is opaque, use E-6000 for the ultimate hold. These earrings feature a bezel setting, with slightly raised edge. Will allow for doming resin, giving a 3-D look to layered objects. Measurements: Outside of oval is 20.5mm long, 16mm wide. Inside of oval is 18mm long, 13mm wide. Approximately 2mm deep. Total length of earring from top of hook to bottom of bezel is 28.5mm. Earrings hooks are 19 gauge. Quantity: 1 Pair of earrings.

ANTQ GOLD PLATED PATERA LG SQUARE BEZEL EARRINGS 1 PAIR $8.91 Patera Brand Earring Findings. Antiqued 22K Gold Plated Over Lead-free Pewter. Large Square Bezels. Quantity: 1 Pair. Hook earrings with small square bezel base for collage, Steampunk, cabochon, and resin dome projects. Antiqued 22K Gold plated onto lead-free pewter. Completely customize jewelry by using a Patera base and embellishing with your own photos, words, and designs. Layer images and small stones, charms, and glitter by using Diamond Glaze or Magic-Glos UV resin. UV Resin can cure quickly in sunlight, or use a table-top UV lamp. If using a clear glass cabochon, we recommend using Diamond Glaze as an adhesive. If the back of your cab is opaque, use E-6000 for the ultimate hold. These earrings feature a bezel setting, with slightly raised edge. Will allow for doming resin, giving a 3-D look to layered objects. Measurements: Outside of square is 18.5mm wide. Inside of square is 16mm x 16mm wide. Approximately 2mm deep. Total length of earring from top of hook to bottom of bezel is 26.5mm. Earrings hooks are 19 gauge. Quantity: 1 Pair of earrings.

ANTQ SILVER PLATED FLAT TAG OVAL TOGGLE PENDANT 1.5 IN $6.66 Patera Brand Flat Tag Toggle Pendant. Antiqued Silver Plated Over Pewter. Lead-free. Grande Oval.1 1/2 x 1 Inch / 38mm x 26mm. Oval base for collage, Steampunk, cabochon, and resin dome projects. This versatile pendant can be used as a toggle clasp when paired with a coordinating toggle bar. Antiqued 22K Silver plated onto lead-free pewter. Completely customize jewelry by using a Patera base and embellishing with your own photos, words, and designs. Perfect for use with the Patera rubber stamps and StazOn ink pads. Layer images and small stones, charms, and glitter by using Diamond Glaze or Magic-Glos UV resin. UV Resin can cure quickly in sunlight, or use a table-top UV lamp. This pendant is flat and perfect for use with metal design stamps. Note: This blank is plated, which means the stamping will reveal the pewter underneath. We recommend rubbing a small amount of black paint into the impression and wiping it off to impart an antiqued appearance. Measurements: 42mm long (including loop), 38mm long (1 1/2 Inch) x 26mm wide (1 Inch), 1.5mm thick. Inner hole is 12mm in diameter. Best for simple photos and flat collage. Small hole is 1.5mm diameter. Quantity: 1 toggle pendant.

ANTQ SILVER PLATED PATERA BEZEL LG ROUND EARRINGS 1 PR $8.91 Patera Brand Earring Findings. Antiqued Silver Plated Over Lead-free Pewter. Large 20mm Diameter Circle Bezels. Quantity: 1 Pair. Hook earrings with large circle bezel base for collage, Steampunk, cabochon, and resin dome projects. Antiqued Silver plated onto lead-free pewter. Completely customize jewelry by using a Patera base and embellishing with your own photos, words, and designs. Layer images and small stones, charms, and glitter by using Diamond Glaze or Magic-Glos UV resin. UV Resin can cure quickly in sunlight, or use a table-top UV lamp. If using a clear glass cabochon, we recommend using Diamond Glaze as an adhesive. If the back of your cab is opaque, use E-6000 for the ultimate hold. These earrings feature a bezel setting, with slightly raised edge. Will allow for doming resin, giving a 3-D look to layered objects. Measurements: Circle has a 20mm outer diameter and a 17.7mm inner diameter. Approximately 2mm deep. Total length of earring from top of hook to bottom of bezel is 28.5mm. Earrings hooks are 19 gauge. Quantity: 1 Pair of earrings.

ANTQ’D COPPER PLATED PATERA COLLAGE PENDANT SQUARE 18MM $5.74 Patera Brand Collage Pendant Bead. Antiqued Copper Plated Over Pewter. Lead-free. Square.18mm Wide. Small Square base for collage, Steampunk, cabochon, and resin dome projects. Antiqued Copper plated onto lead-free pewter. Completely customize jewelry by using a Patera base and embellishing with your own photos, words, and designs. Layer images and small stones, charms, and glitter by using Diamond Glaze or Magic-Glos UV resin. UV Resin can cure quickly in sunlight, or use a table-top UV lamp. Amazing Glaze or Fluxe powder can be baked into these frames. Link with jump rings up to 18 Gauge thickness. This small pendant has right-angle edges. It will allow for doming resin, giving a 3-D look to layered objects. Back is smooth and flat. Measurements: Total length is 26mm long. Outer area is 18mm square. Inner work area measures 16mm (5/8 Inch.) Approximately 3mm deep. Hanging loop have an interior diameter of 3.6mm. Quantity: 1 pendant.

ANTQ’D GOLD PLATED COLLAGE PENDANT SQUARE 2-LOOP 5/8 IN $5.74 Patera Brand Collage 2-Loop Pendant Bead. Antiqued Gold Plated Over Pewter. Lead-free. Deep Square.Fits 5/8 Inch Punch. Square bezel base for collage, Steampunk, cabochon, and resin dome projects. Antique gold plated onto lead-free pewter. Connector style features a closed perpendicular loop at opposite ends. Completely customize jewelry by using a Patera base and embellishing with your own photos, words, and designs. Layer images and small stones, charms, and glitter by using Diamond Glaze, Gel du Soleil UV Epoxy, or Magic-Glos UV resin. UV Resin can cure quickly in sunlight, or use a table-top UV lamp. Link with jump rings up to 18 Gauge thickness. This connector is a bezel setting, with raised edge. It will allow for doming resin, giving a 3-D look to layered objects. Back is smooth and flat. Measurements: Total length is 28mm long. Outer area is 19mm square. Inner work area measures 16mm (5/8 Inch.) Approximately 1.5mm deep. Hanging loops have an interior diameter of 2mm. Quantity: 1 connector pendant. Please note: Photos are not necessarily to scale, so please use measurements when choosing size.

ANTQ’D GOLD PLATED PATERA LRG BEZEL CIRCLE PENDANT 19MM $5.74 Patera Brand Collage Pendant. Antiqued Gold Plated Over Pewter. Lead-free. Small 19mm Diameter Circle. Use 5/8 Inch Punch. Small circle bezel base for collage, Steampunk, cabochon, and resin dome projects. Antiqued gold plated onto lead-free pewter. Pendant features a closed perpendicular loop at top. Completely customize jewelry by using a Patera base and embellishing with your own photos, words, and designs. Layer images and small stones, charms, and glitter by using Diamond Glaze or Magic-Glos UV resin. UV Resin can cure quickly in sunlight, or use a table-top UV lamp. If using a clear glass cabochon, we recommend using resin as an adhesive. If the back of your cab is opaque, use E-6000 for the ultimate hold. This pendant is a bezel setting, with raised edge. It will allow for doming resin, giving a 3-D look to layered objects. Back is smooth and flat. Measurements: Circle has a 19mm outer diameter and a 17mm inner diameter. Approximately 3mm deep. Hanging loop has an interior diameter of 3.7mm, so it will fit a chain or cord up to 3.5mm thick. Quantity: 1 Pendant.

ANTQ’D SILVER PLATED PATERA COLLAGE PENDANT SQUARE 18MM $5.74 Patera Brand Collage Pendant Bead. Antiqued Silver Plated Over Pewter. Lead-free. Square.18mm Wide. Small Square base for collage, Steampunk, cabochon, and resin dome projects. Antiqued silver plated onto lead-free pewter. Completely customize jewelry by using a Patera base and embellishing with your own photos, words, and designs. Layer images and small stones, charms, and glitter by using Diamond Glaze or Magic-Glos UV resin. UV Resin can cure quickly in sunlight, or use a table-top UV lamp. Amazing Glaze or Fluxe powder can be baked into these frames. Link with jump rings up to 18 Gauge thickness. This small pendant has right-angle edges. It will allow for doming resin, giving a 3-D look to layered objects. Back is smooth and flat. Measurements: Total length is 26mm long. Outer area is 18mm square. Inner work area measures 16mm (5/8 Inch.) Approximately 3mm deep. Hanging loop have an interior diameter of 3.6mm. Quantity: 1 pendant.

ANTQ. SILVER PLATED PATERA LARGE 16MM BEZEL SQUARE RING $7.19 Patera Brand Collage Ring. Antiqued Silver Plated Over Pewter. Lead-free. Large 18mm Square. Adjustable Ring Size. Large Square bezel base for collage, Steampunk, cabochon, and resin dome projects. Antiqued silver plated onto lead-free pewter. This ring is adjustable, and will fit most adult ring sizes. Completely customize jewelry by using a Patera base and embellishing with your own photos, words, and designs. Layer images and small stones, charms, and glitter by using Diamond Glaze or Magic-Glos UV resin. UV Resin can cure quickly in sunlight, or use a table-top UV lamp. If using a clear glass cabochon, we recommend using Diamond Glaze as an adhesive. If the back of your cab is opaque, use E-6000 for the ultimate hold. This ring is a bezel setting, with slightly raised edge. Will allow for doming resin, giving a 3-D look to layered objects. Measurements: Square has 18mm outer measurements and a 16mm inner area. Approximately 2mm deep. Band of ring is 9.5mm wide and is adjustable to fit most adult sizes. Quantity: 1 Ring.

BLACK FINISH PEWTER BEADED ROUND FRAME PENDANT 23.5MM $3.21 Beautiful, Quality Tierracast Black Finish Pewter Pendant. Beaded Round With Spiral Design On Back. Create Personalized Pendants With Your Own Photos. 23.5mm x 19.5mm. 1 Pendant. From TierraCast’s new Alternatives Collection, black finish over lead-free pewter. It’s part gothic, part youthful, part futuristic. It’s a versatile and unique shade that can be classy and edgy at the same time! Round Shape With Beaded Design. Back of pendant features leafy branch design. (See photo for details.) Personalize pendant with your own photos, letters, graphics, bits of fabric, small beads, etc. The sky’s the limit! We recommend using Diamond Glaze or DG3 for a clear, glass-like finish. Basic instructions provided below. Measurements: Pendant is 23.5mm including loop. 19.5mm wide. 3.3mm thick. Area for photo is approximately 12.6mm in diameter. Hanging loop is 2.2mm. Quantity: 1 Pendant. TierraCast Pewter is made in the USA, using Lead Free Pewter that exceeds both the CPSC standard and the new California law regulating children’s jewelry content. Tips for Picture Perfect TierraCast Frames using Dimensional Art Glazes.Choosing images for your frames: If applying a glaze, use images printed with non water-soluble inks. images printed with regular ink-jet ink will bleed. Place cropped. images in frame with small amount of adhesive and allow to dry. Glaze and adhesive recommendations: Use Diamond Glaze dimensional adhesive or DG3. You can use a little glaze as the initial adhesive to adhere image to frame.Avoiding Bubbles: Before applying glazes/adhesives, squeeze a bit through the tip to release air bubbles from the nozzle. Don__t shake the bottle. Should. bubbles occur, use a small dry paint brush to carefully pop them. Once the glaze starts to set, bubbles are harder to remove. Be patient: Let the glaze dry thoroughly before handling your picture frames. You won__t be sorry. Our Jewel Setter is a great tool to use with this kind of project. You can avoid touching the adhesive an

BRASS OXIDE PEWTER BEADED ROUND FRAME PENDANT 23.5MM $3.21 Beautiful, Quality Tierracast Brass Oxide Finish Pewter Pendant. Beaded Round With Spiral Design On Back. Create Personalized Pendants With Your Own Photos. 23.5mm x 19.5mm. 1 Pendant. From TierraCast’s new Alternatives Collection, brass oxide finish over lead-free pewter. These are not brass stampings, but strong and beautiful castings made with TierraCast’s attention to quality. This muted finish is a perfect complement for vintage-inspired designs. The color matches well with some of our other antiqued brass color jewelry components. Round Shape With Beaded Design. Back of pendant features leafy branch design. (See photo for details.) Personalize pendant with your own photos, letters, graphics, bits of fabric, small beads, etc. The sky’s the limit! We recommend using Diamond Glaze or DG3 for a clear, glass-like finish. Basic instructions provided below. Measurements: Pendant is 23.5mm including loop. 19.5mm wide. 3.3mm thick. Area for photo is approximately 12.6mm in diameter. Hanging loop is 2.2mm. Quantity: 1 Pendant. TierraCast Pewter is made in the USA, using Lead Free Pewter that exceeds both the CPSC standard and the new California law regulating children’s jewelry content. Tips for Picture Perfect TierraCast Frames using Dimensional Art Glazes.Choosing images for your frames: If applying a glaze, use images printed with non water-soluble inks. images printed with regular ink-jet ink will bleed. Place cropped. images in frame with small amount of adhesive and allow to dry. Glaze and adhesive recommendations: Use Diamond Glaze dimensional adhesive or DG3. You can use a little glaze as the initial adhesive to adhere image to frame.Avoiding Bubbles: Before applying glazes/adhesives, squeeze a bit through the tip to release air bubbles from the nozzle. Don__t shake the bottle. Should. bubbles occur, use a small dry paint brush to carefully pop them. Once the glaze starts to set, bubbles are harder to remove. Be patient: Let the glaze dry thoroughly before handl

Beaded 14k Yellow Gold Crucifix Cross Rosary Necklace $1887.99 Reminisce moments of serenity with this inspiring devout rosary necklace. Recite your petitions with earnest prayers as you glaze along its 14k Yellow, White and Rose Gold beads.

CERAMIC GLAZED PAINTED ROUND DISC GREEN PENDANT 43mm (1 $2.86 Glazed Ceramic. Green Disc Pendant. 44mm. Each Ceramic Disc Pendant is handmade so each may differ slightly. Measurements: 42.5m x 42.5mm (1 5/8 inches by 1 5/8 inches), thickness is 6.5mm and hole measures 4mm. Green glaze is painted over top surface of a hand crafted pottery circle. Back and sides are natural texture and color of the clay. Quantity: 1 pendant

CLEAR GLASS JEWELRY PENDANT TILES ROUND 1 3/8 INCH (2) $4.72 Crystal Clear Glass Tiles. Round Shape. Flat Back – Non-magnifying. 1 3/8 Inch Diameter. 2 Pendant Tiles. Beautiful crystal clear glass tiles, perfect for customized pendants. The hard work is done for you, these glass tiles are perfectly smooth, with softly rounded edges. Use photos, word collages, interesting patterns, drawings, fabric – just about anything flat and thin. Make sure to cut the size precisely. Trying to trim once the tile is glued down can get messy and leave rough edges. We recommend Diamond Glaze for a clear, glassy seal. Paint a thin layer of Diamond Glaze on back of tile and slowly place your design on surface. Check for bubbles or spots that don’t come in contact with the Glaze and press gently to smooth it. Allow pendant to dry completely at this stage. For a nice finish to the back of your piece, choose an opaque, solid colored paper. Make sure it won’t show through your original design, (unless you want it to!) Brush on more Diamond Glaze, making sure to coat entire surface, and apply your backing. Allow plenty of drying time. Finally, use E-6000 glue to affix a specially designed Aanraku bail to the back. Once dry, it will be ready to hang on the chain or cord of your choice. Measurements: Round Glass Pendant tile 1 3/8 Inches (35mm) Diameter and 3/16 Inch (4.7mm) thick. Quantity: 2 Glass Tiles.

COLLAGE SHEET BUTTERFLIES & BIRDS FOR SCRAPBOOK PATERA $9.19 Vintage Look Collage Sheet. Butterflies And Birds. Full Color. Fits Multiple Patera Styles. 1 Sheet. Get started with collage projects right away! Beautiful, vibrant images of birds, butterflies, and nests. These collage sheets feature a variety of designs in different shapes and sizes. Each size will fit a specific Patera shape. Patera punches can be used to quickly and accurately cut the shapes, but fine scissors or an Exacto knife, and patience will also work. These images will not blur, stain, or run when used with water based glues, Mod Podge, Diamond Glaze, etc. The colors will show beautifully through resins, Gel Du Soleil, and Magic Glos. Naturally, these images can be used in scrap books, greeting cards, place cards, decoupage, etc. etc. etc.! You will receive one sheet measuring 11 Inches X 4 1/4 Inches containing 34 images. There are some duplicate pictures, which are great for matching earrings! Please note: image is faded to prevent reproduction. Actual item shows vibrant color and clean lines.

COLLAGE SHEET SONG BIRDS FOR SCRAPBOOK PATERA $9.19 Vintage Look Collage Sheet. Birds And Music. Full Color. Fits Multiple Patera Styles. 1 Sheet. Get started with collage projects right away! Intriguing images of birds laid over prints of sheet music and words. Shades of pink, cream and blue are the dominant colors. These collage sheets feature a variety of designs in different shapes and sizes. Each size will fit a specific Patera shape. Patera punches can be used to quickly and accurately cut the shapes, but fine scissors or an Exacto knife, and patience will also work. These images will not blur, stain, or run when used with water based glues, Mod Podge, Diamond Glaze, etc. The colors show beautifully through resins, Gel Du Soleil, and Magic Glos. Naturally, these images can be used in scrap books, greeting cards, place cards, decoupage, etc. etc. etc.! You will receive one sheet measuring 11 Inches X 4 1/4 Inches containing 34 images. There are some duplicate pictures, which are great for matching earrings! Please note: image is faded to prevent reproduction. Actual item shows vibrant color and clean lines.

COLLAGE SHEET WINTER HOLIDAY FOR SCRAPBOOK PATERA $9.19 Vintage Look Collage Sheet. Winter Holiday. Black And White. Fits Multiple Patera Styles. 1 Sheet. Get started with collage projects right away! Intriguing designs in different sizes and styles. These collage sheets feature a variety of designs in different shapes and sizes. Each word can be used with various Patera findings to create a very unique piece. Patera punches can be used to quickly and accurately cut the shapes, but fine scissors or an Exacto knife, and patience will also work. These images will not blur, stain, or run when used with water based glues, Mod Podge, Diamond Glaze, etc. The colors show beautifully through resins, Gel Du Soleil, and Magic Glos. Naturally, these images can be used in scrap books, greeting cards, place cards, decoupage, etc. etc. etc.! You will receive one sheet measuring 11 Inches X 4 1/4 Inches containing 34 images. There are some duplicate words, which are great for matching earrings!

COPPER PLATED COLLAGE PENDANT ROUND 2-LOOP LINK 14.5MM $3.16 Patera Brand Collage 2-Loop Link Pendant Bead. Antiqued Copper Plated Over Pewter. Lead-free. Circle.27mm. Small circle bezel base for collage, Steampunk, cabochon, and resin dome projects. Antiqued copper plated onto lead-free pewter. Connector style features a closed loop at opposite ends. Completely customize jewelry by using a Patera base and embellishing with your own photos, words, and designs. Layer images and small stones, charms, and glitter by using Diamond Glaze or Magic-Glos UV resin. UV Resin can cure quickly in sunlight, or use a table-top UV lamp. Link with jump rings up to 18 Gauge thickness. These beads are small enough to be linked together to form a bracelet. This connector is a bezel setting, with a plain edge. It will allow for doming resin, giving a 3-D look to layered objects. Back is smooth and flat. Measurements: Total length is 21mm long. Round outer area is 14.5mm in diameter. Inner work area measures 12.8mm (1/2 Inch.) Approximately 1.7mm deep. Hanging loops have an interior diameter of 1.5mm. Quantity: 1 link bead.

COPPER PLATED PEWTER SQUARE PICTURE FRAME PENDANT 25MM $4.31 Beautiful, Quality Tierracast Copper Plated Pewter Pendant. Rustic Square With Abstract Design On Back. Create Personalized Pendants With Your Own Photos. 25mm x 21.7mm. 1 Pendant. This lead-free pewter charm is plated with Genuine Copper in an antiqued finish. Square Shape With Rustic Edges. Back of pendant features abstract design. (See photo for details.) Personalize pendant with your own photos, letters, graphics, bits of fabric, small beads, etc. The sky’s limit! We recommend using Diamond Glaze or DG3 for a clear, glass-like finish. Basic instructions provided below. Measurements: Pendant is 25mm including loop. 21.7mm wide. 2.6mm thick. Area for photo is approximately 15.7mm square. Hanging loop is 2.1mm. Quantity: 1 Pendant. TierraCast Pewter is made in the USA, using Lead Free Pewter that exceeds both the CPSC standard and the new California law regulating children’s jewelry content. Tips for Picture Perfect TierraCast Frames using Dimensional Art Glazes.Choosing images for your frames: If applying a glaze, use images printed with non water-soluble inks. images printed with regular ink-jet ink will bleed. Place cropped. images in frame with small amount of adhesive and allow to dry. Glaze and adhesive recommendations: Use Diamond Glaze dimensional adhesive or DG3. You can use a little glaze as the initial adhesive to adhere image to frame.Avoiding Bubbles: Before applying glazes/adhesives, squeeze a bit through the tip to release air bubbles from the nozzle. Don??t shake the bottle. Should. bubbles occur, use a small dry paint brush to carefully pop them. Once the glaze starts to set, bubbles are harder to remove. Be patient: Let the glaze dry thoroughly before handling your picture frames. You won??t be sorry. Our Jewel Setter is a great tool to use with this kind of project. You can avoid touching the adhesive and the other end of the tool can be used to pop any stray bubbles.Have fun: Play with lots of different materials in the frames. Photos, playing c

COPPER PLATED PEWTER VICTORIAN HEART FRAME CHARM 20MM/1 $3.32 Antiqued Silver Plated Pewter. TierraCast Lead-Free Pewter. Victorian Heart Frame Charm. Quantity: 1 Charm. Lead-Free TierraCast pewter, plated with fine Silver in an antiqued finish. Heart shaped bezel frame charm from TierraCast’s new Metamorphosis collection. One side features a Victorian motif. The reverse side can be used as a frame for images. Personalize pendant with your own photos, letters, graphics, bits of fabric, small beads, etc. The sky’s limit! Approximate Measurements : Quantity: 1 Charm TierraCast Pewter is made in the USA, using Lead Free Pewter that exceeds both the CPSC standard and the new California law regulating children’s jewelry content. Tips for Picture Perfect TierraCast Frames using Dimensional Art Glazes. If applying a glaze, use images printed with non water-soluble inks. Images printed with regular ink-jet ink will bleed. Place cropped images in frame with small amount of adhesive and allow to dry. Glaze and adhesive recommendations: Use Diamond Glaze dimensional adhesive or DG3. You can use a little glaze as the initial adhesive to adhere image to frame.

Copper Plated Lead-Free Pewter Flower Picture Frame Pendant 23mm (1) $4.89 Beautiful, Quality Tierracast Pewter Pendant Plated With Real Copper. Flower Shape With Groovy Circle Design On Back. Create Personalized Pendants With Your Own Photos. 27mm x 17.4mm. 1 Pendant This lead-free pewter charm is plated with real Copper in an antiqued finish. Sweet Flower Shape. Back of pendant features Abstract circle design. (See photo for details.) Personalize pendant with your own photos, letters, graphics, bits of fabric, small beads, etc. The sky is the limit! We recommend using Diamond Glaze or DG3 for a clear, glass-like finish. Basic instructions provided below. Measurements: Pendant is 27mm including loop. 17.4mm wide. 3.4mm thick. Area for photo is approximately 7.4mm in diameter. Hanging loop is 2.2mm. Quantity: 1 Pendant. TierraCast Pewter is made in the USA, using Lead Free Pewter that exceeds both the CPSC standard and the new California law regulating children’s jewelry content. Tips for Picture Perfect TierraCast Frames using Dimensional Art Glazes. Choosing images for your frames: If applying a glaze, use images printed with non water-soluble inks. Images printed with regular ink-jet ink will bleed. Place cropped images in frame with small amount of adhesive and allow to dry. Glaze and adhesive recommendations: Use Diamond Glaze dimensional adhesive or DG3. You can use a little glaze as the initial adhesive to adhere image to frame. Avoiding Bubbles: Before applying glazes/adhesives, squeeze a bit through the tip to release air bubbles from the nozzle. Don?t shake the bottle. Should . bubbles occur, use a small dry paint brush to carefully pop them. Once the glaze starts to set, bubbles are harder to remove. Be patient: Let the glaze dry thoroughly before handling your picture frames. You won?t be sorry. Our Jewel Setter is a great tool to use with this kind of project. You can avoid touching the adhesive and the other end of the tool can be used to pop any stray bubbles.Have fun. Play with lots of different materials in the frames. Pho

Copper Plated Lead-Free Pewter Hammered Square Picture Frame Pendant 22mm (1) $4.89 Beautiful, Quality Tierracast Pewter Pendant Plated With Real Copper. Hammered Square With Spiral Design On Back. Create Personalized Pendants With Your Own Photos. 22mm x 18.5mm. 1 Pendant This lead-free pewter charm is plated with Real Copper in an antiqued finish. Square Shape With Hammered Texture. Back of pendant features spiral design. (See photo for details.) Personalize pendant with your own photos, letters, graphics, bits of fabric, small beads, etc. The sky is the limit! We recommend using Diamond Glaze or DG3 for a clear, glass-like finish. Basic instructions provided below. Measurements: Pendant is 22mm including loop. 18.5mm wide. 2.8mm thick. Area for photo is approximately 12.1mm square. Hanging loop is 2.2mm. Quantity: 1 Pendant. TierraCast Pewter is made in the USA, using Lead Free Pewter that exceeds both the CPSC standard and the new California law regulating children’s jewelry content. Tips for Picture Perfect TierraCast Frames using Dimensional Art Glazes. Choosing images for your frames: If applying a glaze, use images printed with non water-soluble inks. Images printed with regular ink-jet ink will bleed. Place cropped images in frame with small amount of adhesive and allow to dry. Glaze and adhesive recommendations: Use Diamond Glaze dimensional adhesive or DG3. You can use a little glaze as the initial adhesive to adhere image to frame. Avoiding Bubbles: Before applying glazes/adhesives, squeeze a bit through the tip to release air bubbles from the nozzle. Don?t shake the bottle. Should bubbles occur, use a small dry paint brush to carefully pop them. Once the glaze starts to set, bubbles are harder to remove. Be patient: Let the glaze dry thoroughly before handling your picture frames. You won?t be sorry. Our Jewel Setter is a great tool to use with this kind of project. You can avoid touching the adhesive and the other end of the tool can be used to pop any stray bubbles. Have fun. Play with lots of different materials in the frames. Photo

Copper Plated Lead-Free Pewter Oval Scalloped Picture Frame Pendant (1) $5.19 Beautiful, Quality Tierracast Copper Plated Pewter Pendant. Large Oval Shape With Leaf Design On Back. Create Personalized Pendants With Your Own Photos. 28.5mm x 19mm. 1 Pendant This lead-free pewter charm is plated with Real Copper in an antiqued finish. Large Oval Shape with scalloped edges. Back of pendant features leafy branch design. (See photo for details.) Personalize pendant with your own photos, letters, graphics, bits of fabric, small beads, etc. The sky is the limit! We recommend using Diamond Glaze or DG3 for a clear, glass-like finish. Basic instructions provided below. Measurements: Pendant is 28.5mm including loop. 19mm wide. 2.5mm thick. Area for photo is approximately 17mm X 11.5mm. Hanging loop is 2.3mm. Quantity: 1 Pendant. TierraCast Pewter is made in the USA, using Lead Free Pewter that exceeds both the CPSC standard and the new California law regulating children’s jewelry content. Tips for Picture Perfect TierraCast Frames using Dimensional Art Glazes. Choosing images for your frames: If applying a glaze, use images printed with non water-soluble inks. Images printed with regular ink-jet ink will bleed. Place cropped . images in frame with small amount of adhesive and allow to dry. Glaze and adhesive recommendations: Use Diamond Glaze dimensional adhesive or DG3. You can use a little glaze as the initial adhesive to adhere image to frame. Avoiding Bubbles: Before applying glazes/adhesives, squeeze a bit through the tip to release air bubbles from the nozzle. Don?t shake the bottle. Should bubbles occur, use a small dry paint brush to carefully pop them. Once the glaze starts to set, bubbles are harder to remove. Be patient: Let the glaze dry thoroughly before handling your picture frames. You won?t be sorry. Our Jewel Setter is a great tool to use with this kind of project. You can avoid touching the adhesive and the other end of the tool can be used to pop any stray bubbles. Have fun. Play with lots of different materials in the frames. Photo

Copper Plated Lead-Free Pewter Rectangle Picture Frame Pendant 35mm (1) $5.39 Beautiful, Quality Tierracast Copper Plated Pewter Pendant . Textured Rectangle With Geometric Pattern On Back . Create Personalized Pendants With Your Own Photos . 34.7mm x 19mm . 1 Pendant This lead-free pewter charm is plated with fine Copper in an antiqued finish. Long Rectangle Shape With Textured Edges. Back of pendant features geometric design. (See photo for details.) Personalize pendant with your own photos, letters, graphics, bits of fabric, small beads, etc. The sky’s limit! We recommend using Diamond Glaze or DG3 for a clear, glass-like finish. Basic instructions provided below. Measurements: Pendant is 34.7mm including loop. 19mm wide. 3mm thick. Area for photo is approximately 25mm X 12.7mm. Hanging loop is 2mm. Quantity: 1 Pendant. TierraCast Pewter is made in the USA, using Lead Free Pewter that exceeds both the CPSC standard and the new California law regulating children’s jewelry content. . Tips for Picture Perfect TierraCast Frames using Dimensional Art Glazes. Choosing images for your frames: . If applying a glaze, use images printed with non water-soluble inks. . images printed with regular ink-jet ink will bleed. Place cropped . images in frame with small amount of adhesive and allow to dry. . Glaze and adhesive recommendations: . Use Diamond Glaze dimensional adhesive or DG3. You can use a little glaze as the initial adhesive to adhere image to frame.. Avoiding Bubbles: . Before applying glazes/adhesives, squeeze a bit through the tip to release air bubbles from the nozzle. Don?t shake the bottle. Should . bubbles occur, use a small dry paint brush to carefully pop them. Once the glaze starts to set, bubbles are harder to remove. . Be patient: Let the glaze dry thoroughly before handling your picture frames. You won?t be sorry. . Our Jewel Setter is a great tool to use with this kind of project. You can avoid touching the adhesive and the other end of the tool can be used to pop any stray bubbles.. Have fun: . Play with lots of different mater

Fine Silver Plated Lead-Free Pewter Beaded Round Picture Frame Pendant 23.5mm (1) $4.89 Beautiful, Quality Tierracast Silver Plated Pewter Pendant. Beaded Round With Spiral Design On Back. Create Personalized Pendants With Your Own Photos. 23.5mm x 19.5mm. 1 Pendant This lead-free pewter charm is plated with fine Silver in an antiqued finish. Round Shape With Beaded Design. Back of pendant features leafy branch design. (See photo for details.) Personalize pendant with your own photos, letters, graphics, bits of fabric, small beads, etc. The sky’s the limit! We recommend using Diamond Glaze or DG3 for a clear, glass-like finish. Basic instructions provided below. Measurements: Pendant is 23.5mm including loop. 19.5mm wide. 3.3mm thick. Area for photo is approximately 12.6mm in diameter. Hanging loop is 2.2mm. Quantity: 1 Pendant. TierraCast Pewter is made in the USA, using Lead Free Pewter that exceeds both the CPSC standard and the new California law regulating children’s jewelry content. Tips for Picture Perfect TierraCast Frames using Dimensional Art Glazes. Choosing images for your frames: If applying a glaze, use images printed with non water-soluble inks. Images printed with regular ink-jet ink will bleed. Place cropped images in frame with small amount of adhesive and allow to dry. Glaze and adhesive recommendations: Use Diamond Glaze dimensional adhesive or DG3. You can use a little glaze as the initial adhesive to adhere image to frame. Avoiding Bubbles: Before applying glazes/adhesives, squeeze a bit through the tip to release air bubbles from the nozzle. Don?t shake the bottle. Should bubbles occur, use a small dry paint brush to carefully pop them. Once the glaze starts to set, bubbles are harder to remove. Be patient: Let the glaze dry thoroughly before handling your picture frames. You won?t be sorry. Our Jewel Setter is a great tool to use with this kind of project. You can avoid touching the adhesive and the other end of the tool can be used to pop any stray bubbles. Have fun. Play with lots of different materials in the frames. Photos,

Fine Silver Plated Lead-Free Pewter Flower Shape Picture Frame Pendant 17.5mm (1) $4.49 Beautiful, Quality Tierracast Silver Plated Pewter Pendant. Sweet Flower Shape With Spiral Design On Back. Create Personalized Pendants With Your Own Photos. 17.5mm x 13mm . 1 Pendant This lead-free pewter charm is plated with fine Silver. Light antiquing to bring out designs on back. Adorable flower shape. Back of pendant has a circle and dot design. (See photo for details.) Personalize pendant with your own photos, letters, graphics, bits of fabric, small beads, etc. The sky’s the limit! We recommend using Diamond Glaze or DG3 for a clear, glass-like finish. Basic instructions provided below. Measurements: Pendant is 17.5mm including loop. 13mm wide. 3.2mm thick. Area for photo is approximately 9mm in diameter. Hanging loop is 2.3mm. Quantity: 1 Pendant. TierraCast Pewter is made in the USA, using Lead Free Pewter that exceeds both the CPSC standard and the new California law regulating children’s jewelry content. Tips for Picture Perfect TierraCast Frames using Dimensional Art Glazes. Choosing images for your frames: If applying a glaze, use images printed with non water-soluble inks. Images printed with regular ink-jet ink will bleed. Place cropped images in frame with small amount of adhesive and allow to dry. Glaze and adhesive recommendations: Use Diamond Glaze dimensional adhesive or DG3. You can use a little glaze as the initial adhesive to adhere image to frame. Avoiding Bubbles: Before applying glazes/adhesives, squeeze a bit through the tip to release air bubbles from the nozzle. Don?t shake the bottle. Should bubbles occur, use a small dry paint brush to carefully pop them. Once the glaze starts to set, bubbles are harder to remove. Be patient: Let the glaze dry thoroughly before handling your picture frames. You won?t be sorry. Our Jewel Setter is a great tool to use with this kind of project. You can avoid touching the adhesive and the other end of the tool can be used to pop any stray bubbles.. Have fun: . Play with lots of different materials in the

Fine Silver Plated Lead-Free Pewter Square Picture Frame Pendant 21mm (1) $4.89 Beautiful, Quality Tierracast Silver Plated Pewter Pendant. Rustic Square With Spiral Design On Back. Create Personalized Pendants With Your Own Photos. 22mm x 18.5mm . 1 Pendant This lead-free pewter charm is plated with fine Silver in an antiqued finish. Square Shape With Rustic Edges. Back of pendant features spiral design. (See photo for details.) Personalize pendant with your own photos, letters, graphics, bits of fabric, small beads, etc. The sky is the limit! We recommend using Diamond Glaze or DG3 for a clear, glass-like finish. Basic instructions provided below. Measurements: Pendant is 21mm including loop. 18mm wide. 2.6mm thick. Area for photo is approximately 12.1mm X 12.7mm. Hanging loop is 2.2mm. Quantity: 1 Pendant. TierraCast Pewter is made in the USA, using Lead Free Pewter that exceeds both the CPSC standard and the new California law regulating children’s jewelry content. Tips for Picture Perfect TierraCast Frames using Dimensional Art Glazes. Choosing images for your frames: If applying a glaze, use images printed with non water-soluble inks. Images printed with regular ink-jet ink will bleed. Place cropped images in frame with small amount of adhesive and allow to dry. Glaze and adhesive recommendations: Use Diamond Glaze dimensional adhesive or DG3. You can use a little glaze as the initial adhesive to adhere image to frame. Avoiding Bubbles: Before applying glazes/adhesives, squeeze a bit through the tip to release air bubbles from the nozzle. Don?t shake the bottle. Should bubbles occur, use a small dry paint brush to carefully pop them. Once the glaze starts to set, bubbles are harder to remove. Be patient: Let the glaze dry thoroughly before handling your picture frames. You won?t be sorry. Our Jewel Setter is a great tool to use with this kind of project. You can avoid touching the adhesive and the other end of the tool can be used to pop any stray bubbles. Have fun. Play with lots of different materials in the frames. Photos, playing card

GLASS JEWELRY PENDANT TILE W/ HOLE SQUARE 1.87 INCH (4) $3.44 Glass Tiles With Hole. Square Shape. Flat Back – Non-magnifying. 1 7/8 Inch x 15/16 Inch. 4 Pendant Tiles. Glass tiles with a slight green tint, perfect for customized pendants. Tiles have a smooth drilled through hole. These glass tiles are slightly imperfect on the back. Once project is complete you will not notice the slight beveled texture. Tiles edges are softly rounded. Use photos, word collages, interesting patterns, drawings, fabric – just about anything flat and thin. Make sure to cut the size precisely. Trying to trim once the tile is glued down can get messy and leave rough edges. We recommend Diamond Glaze for a clear, glassy seal. Paint a thin layer of Diamond Glaze on back of tile and slowly place your design on surface. Check for bubbles or spots that don’t come in contact with the Glaze and press gently to smooth it. Allow pendant to dry completely at this stage. For a nice finish to your piece, choose an opaque, solid colored paper. Make sure it won’t show through your original design, (unless you want it to!) Brush on more Diamond Glaze, making sure to coat entire surface, and apply your backing. Allow plenty of drying time. Finally, use E-6000 glue to affix a specially designed Aanraku bail to the back. Once dry, it will be ready to hang on the chain or cord of your choice. Measurements: Square Glass Pendant tile 1 7/8 Inches (48mm) Square and 1/5 Inch (5mm) thick. Hole measures 2.5mm inner diameter, 8mm from top of pendant to center of the hole. Quantity: 4 Glass Tiles.

GOLD PLATED COLLAGE PENDANT OVAL 2-LOOP LINK 1 1/2 IN $8.61 Patera Brand Collage 2-Loop Link Pendant Bead. Antiqued Gold Plated Over Pewter. Lead-free. Long Oval.1 1/2 Inch X 1 Inch. Grande Oval bezel base for collage, Steampunk, cabochon, and resin dome projects. Antiqued Gold plated onto lead-free pewter. Connector style features a closed loop at opposite ends. Completely customize jewelry by using a Patera base and embellishing with your own photos, words, and designs. Layer images and small stones, charms, and glitter by using Diamond Glaze, Gel du Soleil UV Epoxy, or Magic-Glos UV resin. UV Resin can cure quickly in sunlight, or use a table-top UV lamp. Link with jump rings up to 18 Gauge thickness. This connector is a bezel setting, with a plain edge. It will allow for doming resin, giving a 3-D look to layered objects. Back is smooth and flat. Measurements: Total length is 49mm (1.9 Inches) long. Inner work area measures 1 1/2 Inch X 1 Inch (38mm X 25.4mm.) Approximately 3mm deep. Hanging loops have an interior diameter of 2.3mm. Quantity: 1 link bead. Please Note: Photos may not be to scale, so use stated measurements to determine if this size will fit your project.

GOLD PLATED COLLAGE PENDANT SQUARE 2-LOOP LINK 1 1/4 $8.61 Patera Brand Collage 2-Loop Link Pendant Bead. Antiqued Gold Plated Over Pewter. Lead-free. Large Square Shape.1 1/4 Inch. Grande Square bezel base for collage, Steampunk, cabochon, and resin dome projects. Antiqued gold plated onto lead-free pewter. Connector style features a closed loop at opposite ends. Completely customize jewelry by using a Patera base and embellishing with your own photos, words, and designs. Layer images and small stones, charms, and glitter by using Diamond Glaze, Gel du Soleil UV Epoxy, or Magic-Glos UV resin. UV Resin can cure quickly in sunlight, or use a table-top UV lamp. Link with jump rings up to 18 Gauge thickness. This connector is a bezel setting, with a plain edge. It will allow for doming resin, giving a 3-D look to layered objects. Back is smooth and flat. Measurements: Total length is 43mm (1.7 Inches) long. Inner work area measures 1 1/4 Inch (31.75mm) square. Approximately 3mm deep. Hanging loops have an interior diameter of 2.3mm. Quantity: 1 link bead. Please Note: Photos may not be to scale, so use stated measurements to determine if this size will fit your project.

GOLD PLATED COLLAGE PENDANT SQUARE 2-LOOP LINK 15MM $3.16 Patera Brand Collage 2-Loop Link Pendant Bead. Antiqued Gold Plated Over Pewter. Lead-free. Circle.27mm. Small Square bezel base for collage, Steampunk, cabochon, and resin dome projects. Antiqued Gold plated onto lead-free pewter. Connector style features a closed loop at opposite ends. Completely customize jewelry by using a Patera base and embellishing with your own photos, words, and designs. Layer images and small stones, charms, and glitter by using Diamond Glaze or Magic-Glos UV resin. UV Resin can cure quickly in sunlight, or use a table-top UV lamp. Link with jump rings up to 18 Gauge thickness. These beads are small enough to be linked together to form a bracelet. This connector is a bezel setting, with a plain edge. It will allow for doming resin, giving a 3-D look to layered objects. Back is smooth and flat. Measurements: Total length is 21.5mm long. Outer area is 15mm. Inner work area measures 12.8mm (1/2 Inch.) Approximately 1.7mm deep. Hanging loops have an interior diameter of 1.5mm. Quantity: 1 link bead.

GOLD PLATED PEWTER RECTANGLE PICTURE FRAME PENDANT 31MM $4.39 Beautiful, Quality Tierracast 22K Gold Plated Pewter Pendant. Rustic Rectangle With Abstract Pattern On Back. Create Personalized Pendants With Your Own Photos. 31mm x 15.6mm. 1 Pendant. This lead-free pewter charm is plated with fine 22K Gold in a Bright finish. Long Rectangle Shape With Rustic Edges. Back of pendant features abstract design. (See photo for details.) Personalize pendant with your own photos, letters, graphics, bits of fabric, small beads, etc. The sky’s limit! We recommend using Diamond Glaze or DG3 for a clear, glass-like finish. Basic instructions provided below. Measurements: Pendant is 31mm including loop. 15.6mm wide. 2.6mm thick. Area for photo is approximately 22mm X 9.8mm. Hanging loop is 2.2mm. Quantity: 1 Pendant. TierraCast Pewter is made in the USA, using Lead Free Pewter that exceeds both the CPSC standard and the new California law regulating children’s jewelry content. Tips for Picture Perfect TierraCast Frames using Dimensional Art Glazes.Choosing images for your frames: If applying a glaze, use images printed with non water-soluble inks. images printed with regular ink-jet ink will bleed. Place cropped. images in frame with small amount of adhesive and allow to dry. Glaze and adhesive recommendations: Use Diamond Glaze dimensional adhesive or DG3. You can use a little glaze as the initial adhesive to adhere image to frame.Avoiding Bubbles: Before applying glazes/adhesives, squeeze a bit through the tip to release air bubbles from the nozzle. Don??t shake the bottle. Should. bubbles occur, use a small dry paint brush to carefully pop them. Once the glaze starts to set, bubbles are harder to remove. Be patient: Let the glaze dry thoroughly before handling your picture frames. You won??t be sorry. Our Jewel Setter is a great tool to use with this kind of project. You can avoid touching the adhesive and the other end of the tool can be used to pop any stray bubbles.Have fun: Play with lots of different materials in the frames. Photos,

GOLD PLATED PEWTER SQUARE PICTURE FRAME CONNECTOR 19MM $4.35 Beautiful, Quality Tierracast 22K Gold Plated Pewter Connector Link. Rustic Square With Abstract Design On Back. Create Personalized Links With Your Own Photos. 26.5mm x 19mm. 1 Pendant. This lead-free pewter connector is plated with fine 22K Gold in a bright finish. Square Shape With Rustic Edges. Connect several for a personalized bracelet. Back of bead features abstract design. (See photo for details.) Personalize bead with your own photos, letters, graphics, bits of fabric, small beads, etc. The sky’s limit! We recommend using Diamond Glaze or DG3 for a clear, glass-like finish. Basic instructions provided below. Measurements: Connector is 26.5mm including loops. 19mm wide. 2.6mm thick. Area for photo is approximately 13.5mm square. Loops are 2.1mm. Quantity: 1 Connector Bead. TierraCast Pewter is made in the USA, using Lead Free Pewter that exceeds both the CPSC standard and the new California law regulating children’s jewelry content. Tips for Picture Perfect TierraCast Frames using Dimensional Art Glazes.Choosing images for your frames: If applying a glaze, use images printed with non water-soluble inks. images printed with regular ink-jet ink will bleed. Place cropped. images in frame with small amount of adhesive and allow to dry. Glaze and adhesive recommendations: Use Diamond Glaze dimensional adhesive or DG3. You can use a little glaze as the initial adhesive to adhere image to frame.Avoiding Bubbles: Before applying glazes/adhesives, squeeze a bit through the tip to release air bubbles from the nozzle. Don???t shake the bottle. Should. bubbles occur, use a small dry paint brush to carefully pop them. Once the glaze starts to set, bubbles are harder to remove. Be patient: Let the glaze dry thoroughly before handling your picture frames. You won???t be sorry. Our Jewel Setter is a great tool to use with this kind of project. You can avoid touching the adhesive and the other end of the tool can be used to pop any stray bubbles.Have fun: Play with lots of d